TY - JOUR
T1 - Fabrication and characterization of pneumatic capacitive-dielectric sensor
AU - Mensah, Bismark
AU - Audrey, Akyea Ntriwaa
AU - Akinyemi, Faizat
AU - Boamah, Margaret
AU - Suglo, Alhassan Hakeem
AU - Owoare, Richard Boakye
AU - Kutor, John Kwaku
AU - Younge, Samuel
AU - Nukunya, Tsatsu
AU - Apalangya, Vitus Atanga
N1 - Publisher Copyright:
© The Author(s) 2026. This article is distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 License (https://creativecommons.org/licenses/by-nc/4.0/) which permits non-commercial use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access pages (https://us.sagepub.com/en-us/nam/open-access-at-sage).
PY - 2026/1/1
Y1 - 2026/1/1
N2 - Two inflatable-types of dielectric sensor (one sided-inflatable (OIDS) and two sided-inflatable (TIDS)) were fabricated using acrylic rubber coated with a compliant electrode. The effect of air-pressure (P) on capacitance (C), coated area of compliant electrode, vertical deformation (Rinf) and the volume change were studied. An increase in P expanded the volume, area of coated electrode and Rinf respectively. In terms of Rinf, OIDS and TIDS were stretched above 500 and 800% while swollen to values higher than 23,000 and 77,000% respectively, in terms of volume expansion. These expansions caused changes in the output C for sensors, due to changes in polarization. The measured normalized sensitivity coefficients (nGF), a fractional change in pressure (ΔP/Po) versus area strain (ΔA/Ao) was ∼20.73 and ∼13.6 for OIDS and TIDS respectively. TIDS reached 1.1 kPa-1 at 0.4-0.68 kPa while OIDS recorded 0.12 kPa-1 at 0.4-1.1kPa pressure, in terms of sensitivity (S) based on flexible capacitive sensors ((ΔC/Co)/(ΔP)). The OID harvested an electrical energy of ∼208μJ/s at area expansion ∼186% and could theoretically be used to harvest ∼18J in a day. Therefore, the sensors show promising multifunctional characteristics suitable for applications including; detection of pressures from natural disasters windstorm/typhoon and for harvesting energy.
AB - Two inflatable-types of dielectric sensor (one sided-inflatable (OIDS) and two sided-inflatable (TIDS)) were fabricated using acrylic rubber coated with a compliant electrode. The effect of air-pressure (P) on capacitance (C), coated area of compliant electrode, vertical deformation (Rinf) and the volume change were studied. An increase in P expanded the volume, area of coated electrode and Rinf respectively. In terms of Rinf, OIDS and TIDS were stretched above 500 and 800% while swollen to values higher than 23,000 and 77,000% respectively, in terms of volume expansion. These expansions caused changes in the output C for sensors, due to changes in polarization. The measured normalized sensitivity coefficients (nGF), a fractional change in pressure (ΔP/Po) versus area strain (ΔA/Ao) was ∼20.73 and ∼13.6 for OIDS and TIDS respectively. TIDS reached 1.1 kPa-1 at 0.4-0.68 kPa while OIDS recorded 0.12 kPa-1 at 0.4-1.1kPa pressure, in terms of sensitivity (S) based on flexible capacitive sensors ((ΔC/Co)/(ΔP)). The OID harvested an electrical energy of ∼208μJ/s at area expansion ∼186% and could theoretically be used to harvest ∼18J in a day. Therefore, the sensors show promising multifunctional characteristics suitable for applications including; detection of pressures from natural disasters windstorm/typhoon and for harvesting energy.
KW - capacitive sensor
KW - dielectric sensor
KW - energy harvesting and elastomers
KW - gauge factor
KW - strain sensor
UR - https://www.scopus.com/pages/publications/105047281446
U2 - 10.1177/09673911261477893
DO - 10.1177/09673911261477893
M3 - Article
AN - SCOPUS:105047281446
SN - 0967-3911
VL - 34
JO - Polymers and Polymer Composites
JF - Polymers and Polymer Composites
ER -